• Arabesque 001
  • sam3707
  • CC-Redline-41-at-Newport-Bermuda-800
  • Sabre 362 Shok-o-la
  • GUNBOAT_55-001_Vanquish.jpg
  • Aurora_Sabre_362_TWO.jpg
  • 12_Meter_Nefertiti_Sea_Trials.jpg
  • GUNBOAT_60-002_Flow.jpg
  • Frers_53_Encounter.jpg
  • J111_Arabella.jpg
  • Farr_40_Barking_Mad_02.jpg
  • CC_115_Sailing_1.jpg
  •  SAM5102
  • Tripp-56-Passion-4-C.jpg
  • Dufour_Grand_Large_500_1.jpg
  • J160_Hana_Hou_Diamond_Head.jpg
  • Tartan_4700.jpg
  • e33_Sailing_Near.jpg
  • Lark_47_Sloop_06_2012_BBY.jpg
  • Morris_36_Integral.jpg
  • Magnum_70_Birdseye_01.jpg
  • CBS_Providence_RI.jpg
  • AopZ_Contest_20100825_1728.jpg
  • KRITTER_VIII_-30LI_Integral.jpg
  • Galene_Prout_63.jpg
  • Kallisto_56_Image_02.jpg
  • Solaris_70_Ventus_02.jpg
  • Finn_Flyer_42_FM2012AT2.jpg
  • Bordeaux_60_Disco_Inferno.jpg
  • MAT_1010_Matador.jpg
  • Contest_72CS_Mallorca_2014.jpg
  • Encounter_2015_Frers_53_3.jpg
  • Leopard 3 RTIR 2015

Hydraulic Boom Vangs

boomvangpdfSpecification Table

SAILTEC manufactures boom vangs in the same manner as hydraulic cylinders. The boom vang has a nitrogen return system and if sized properly will support the weight of the boom, eliminating the need for a topping lift.

• Tension is 5000 psi or 350 bar
• Return force is at 500 psi or 35 bar
• Length is pin-to-pin closed and will be adjusted to meet your EXACT REQUIREMENTS
• Stainless cylinders available
• Standard finish is hard coat black anodized

Made of the SAME HIGH QUALITY materials used for SAILTEC cylinders, boom vangs have heavier piston rods than cylinders. Models -17 and larger have a passage in the piston rod to permit plumbing the system pressure to the cylinder jaw, to reduce the amount of the deck hose.